Refresh the screen, in effect performing a redraw of the current document, to remove any undesirable drawing update effects

Refresh the screen

Refresh the screen, in effect performing a redraw of the current document, to remove any undesirable drawing update effects

Refresh the screen

Refresh the workspace, in effect performing a redraw of the current document to remove any undesired drawing update effects

Refresh the screen, in effect performing a redraw of the active simulation analysis chart to remove any undesired drawing update effects

Move the text cursor to the end of the current line

Toggle the display of clearance boundaries

Zoom-out, relative to the current cursor location.

Move the design away from you relative to the cursor position in the current document

Move the waveform(s) away from you relative to the cursor position in the active simulation analysis chart

When auto-panning while placing/moving an object to pan at higher speed

When auto-panning while placing/moving an object, use to pan at higher speed

(hold) When moving a component to view dynamic alignment guides (green indicator lines) in relation to the pads of this and nearby components

Access the 3D rotational sphere. With the sphere displayed, Right-Click and drag to change the orientation of the view

Zoom-in, relative to the current cursor location

Bring the design closer to you relative to the cursor position in the current document

Bring the waveform(s) closer to you relative to the cursor position in the active simulation analysis chart

Scroll up one page

Measure the distance between two points on the active schematic document

Measure and display the distance between any two points in the current document

Measure distances between 3D bodies in the active Multi-board Assembly document

Mirror selected objects about a defined mirror line on the current document

Find and replace text

Select all electrical objects that are connected to the same piece of copper

Use to quickly find specific or partial text in accordance with defined search options

Access the Replace Text dialog in which you can configure a search to locate and replace specific text - located in the current document, all text-based documents in the active project, all open text-based documents, or all text-based documents in a specified directory

Check for collisions between the various constituent entities of the multi-board assembly

Mirror the object being placed/moved along the Y-axis

Right-click Filter sub-menu

Mirror the object being placed/moved along the Y-axis

Toggle Follow Mouse Trail mode

Toggle Amplitude Direction (starting direction) for the accordion pattern

Cycle through available via patterns (aligned or staggered)

Toggle Amplitude Direction (starting direction) for the accordion pattern

Mirror the 3D body object being placed/moved along the Y-axis

Toggle a board that has flexible areas between its flattened state (no Bending Line settings applied) and its folded state (all Bending Line settings applied)

Open the right-click Filter sub-menu

Access the Selection Memory dialog in which you can control all aspects of the selection memory feature

In the workspace to access the Selection Memory dialog, from where you can control all aspects of the selection memory feature

In a dialog or panel to toggle the measurement units (in the dialog or panel only), between metric (mm) and imperial (mil)

Switch to the previous enabled layer

Toggle the display of the SCH Filter panel or the SCHLIB Filter panel accordingly

Toggle the display of the PCB Filter panel or the PCBLIB Filter panel accordingly

Toggle between the Code and Form view for the active script document

Automatically open a document that the cursor is currently over

Single select the next design object in a set of co-located (overlapping) objects without utilizing a selection pop-up window. To use this command, ensure that the Display popup selection dialog option is disabled on the PCB Editor - General page of the Preferences dialog.

Cycle through the four different component selection modes

Tab backwards from the current cursor position

… to 8: Store the current selection in memory location n

… to 8: Store the current selection in memory location 1 - 8

(hold while moving a panel) Prevent automatic docking, grouping, or snapping

(hold) When moving a component to view dynamic alignment guides (green indicator lines) in relation to the boundaries of this and nearby components

As you move the cursor over a 3D object, use to select a specific face of that object

Change routing via start/end layers

Cycle through the defined Gap values available for the differential pair being routed, through the applicable Differential Pairs Routing rule (Min Gap --> Preferred Gap --> Max Gap)

Clear all underlining highlighting from connections across all open (and open and hidden) schematic documents

Copy the selected component definition(s) to the clipboard

Used to clear any filtering that is currently applied to the active document

Clear any filtering that is currently applied to the active document

(click and hold the mouse wheel, then move the mouse forward) Zoom-in, relative to the current cursor location

(click and hold the mouse wheel, then move the mouse forward) Zoom-out, relative to the current cursor location

(click and hold the mouse wheel, then move the mouse forward) Zoom-in, relative to the current cursor location

(click and hold the mouse wheel, then move the mouse forward) Zoom-out, relative to the current cursor location

Find the next occurrence of the currently selected text in the active document

Switch to the next enabled layer

Add fanout via; tool immediately waits for next fanout to route and via to place

Add fanout via, tool immediately waits for next fanout to route and via to place

Add fanout via; tool immediately waits for next fanout to route and via to place

Pop-up the Statement Templates list window

Increase the radius of the arc (by 1mil/0.025mm increments) when in arc cornering placement mode

Increase the amplitude of the accordion pattern by the amount defined for the Amplitude Increment in the Accordion mode of the Properties panel

Increase the radius of the arc (by 1mil/0.025mm increments) when in arc cornering placement mode

Increase the amplitude of the accordion pattern by the amount defined for the Amplitude Increment in the Accordion mode of the Properties panel

Move the current selection (one or more selected design objects) to the left in the current document workspace in increments of one snap grid unit

Scroll to the start of the X-axis in the active simulation analysis chart

Move the text cursor to the left one word at a time

Move the current selection (one or more selected design objects) to the right in the current document workspace in increments of one snap grid unit

Move the current selection (one or more selected design objects) to the right in the current document workspace, in increments of one snap grid unit

Scroll to the end of the X-axis in the active simulation analysis chart

Move the text cursor to the right one word at a time

Scroll vertically within the design workspace

Scroll vertically within the design workspace. This is a default setting that can be changed from the System - Mouse Wheel Configuration page of the Preferences dialog

Cycle forward to the next open tabbed document, making it the active document in the design workspace

Align selected objects by their right edges

Repeat the previous placement/editing command

Align selected objects by their left edges

Move the current selection (one or more selected design objects) downwards in the current document workspace in increments of one snap grid unit

Move the current selection (one or more selected design objects) downwards in the current document workspace, in increments of one snap grid unit

Scroll to the bottom of the active simulation analysis chart

Move the current selection (one or more selected design objects) upwards in the current document workspace in increments of one snap grid unit

Move the current selection (one or more selected design objects) upwards in the current document workspace, in increments of one snap grid unit

Scroll to the top of the active simulation analysis chart

Cycles through the connections available for routing if the current pad has multiple connections

Access the Smart Paste dialog

Make the vertical spacing of selected objects equal

Paste one (or more) component definitions from the clipboard into the component definitions region of the document

Reduce the radius of the arc (by 1mil/0.025mm increments) when in arc cornering placement mode

Decrease the amplitude of the accordion pattern by the amount defined for the Amplitude Increment in the Accordion mode of the Properties panel

Reduce the radius of the arc (by 1mil/0.025mm increments) when in arc cornering placement mode

Decrease the amplitude of the accordion pattern by the amount defined for the Amplitude Increment in the Accordion mode of the Properties panel

Change the view of the board (or component) in 3D so that you are looking straight down from above (perpendicular) with zero rotation

Constrain the direction of movement to the horizontal or vertical axis depending on the initial direction of movement

Step back to the previous document, in the sequence of documents that have been made active in the main design window

Jump to, and make active, the previous component in the current library document. After reaching the first component in the list, the command will not cycle to the last component again.

Change the view of the board (or component) in 3D so that you are looking at the board from an orthogonal perspective

Step forward to the next document in the sequence of documents that have been made active in the main design window

Move selected objects to the nearest point on the current snap grid

Move selected components to the nearest point on the required component placement grid

Jump to, and make active, the next component in the current library document. After reaching the last component in the list, the command will not cycle to the first component again

Change the selection status of the object currently under the cursor without affecting the status of other objects

Turn the visible grid on or off in the current document

Set the X (horizontal) and Y (vertical) step values - for the default Global Board Snap Grid - simultaneously to a chosen value

Cycle Glossing Effort mode (Weak --> Strong --> Off)

Cycle through the three glossing settings (Off, Weak, and Strong) during routing or sliding.

Cycle Glossing Effort mode (Weak --> Strong --> Off)

Access the Manufacturer Part Search dialog in which you can browse for required components across enabled supplier's online part databases. Selected components will be used to create one or more new component definitions in the active Managed Component document

Opens the Manufacturer Part Search dialog in order to search for components and add supplier information to a component.

Align selected objects by their top edges

Move the cursor to the left in the current document workspace in increments of ten snap grid units

Move the cursor (with the attached object being placed/moved) to the left in the current document workspace, in increments of 10 snap grid units

Align selected objects by their top edges

Move the cursor to the left in the current document workspace in increments of 10 snap grid units

Move the cursor (with the attached object being placed/moved) to the left in the current document workspace in increments of 10 snap grid units

Scroll horizontally-left through the data in the active simulation analysis chart one page at a time

Extend a selection by one character to the left of the current cursor position

Move the cursor to the right in the current document workspace in increments of ten snap grid units

Move the cursor (with the attached object being placed/moved) to the right in the current document workspace, in increments of 10 snap grid units

Move the cursor to the right in the current document workspace, in increments of 10 snap grid units

Move the cursor (with the attached object being placed/moved) to the right in the current document workspace in increments of 10 snap grid units

Scroll horizontally-right through the data in the active simulation analysis chart one page at a time

Extend a selection by one character to the right of the current cursor position

Launch the associated dialog (where available) for the selected output in which you can define exactly how, and what, you wish to be generated

Change the display of the main design window to show the current film box and its contents

Scroll to the top of the active simulation analysis chart

Move the text cursor to the beginning of the file