Summons a temporary toolbar that contains commonly-used tools

Locks the current Angle shown in the AccuDraw toolbar

Rotates the AccuDraw compass to the previous orientation. Press the “B” key again to rotate to the AccuDraw compass back to the View orientation

Toggles ON the Center Snap

Locks the current Distance shown in the AccuDraw toolbar

When in the 3D Design Model , press the “E” key to rotate the AccuDraw compass to align with the primary planes: X-Y Plane (Top), X-Z Plane (Front), Y-Z Plane (Side)

When in the 3D Design Model , rotates the AccuDraw compass to align with the Front Plane (X-Z)

Summons the Get ACS tool or AccuDraw Settings. The Get ACS tool is used to activate a previously saved ACS orientation

Toggles ON/OFF the AccuDraw compass

Toggles ON the Intersection Snap

Changes the amount of Snap Divisors that are available with the Key Point Snap

Used to change the Z lock mode for AccuDraw when drawing in the 3D Design Model

Changes the mode of the AccuDraw compass. Toggles between Polar (distance and angle) mode and Cartesian mode (X and Y)

Toggles on the Nearest Snap

Temporarily places the AccuDraw compass at the current mouse cursor location

When drawing elements, use this key-in to specify the location for the next point with a cartesian value (i.e., X=3, Y=6)

Summons a list of commonly used drawing and manipulation tools. For example, press the “Q” key and then the “C” key to execute the Copy tool

Used to access an array of tools used to rotate the AccuDraw Compass

When in the 3D Design Model, rotates the AccuDraw compass to align with the Side Plane (Y-Z)

When in the 3D Design Model, rotates the AccuDraw compass to align with the Top Plane (X-Y)

Resets the AccuDraw compass to align with the View window. After the “V” Key is pressed, the AccuDraw compass will be aligned straight up and down, left and right

Saves and name the current ACS orientation/location

Locks the current X value shown in the AccuDraw toolbar

Locks the current Y value shown in the AccuDraw toolbar

Locks the current Z value shown in the AccuDraw toolbar

Summons a list of commonly used drawing and manipulation tools

Switch (tab) between settings shown in the Dialogue Box