What is ↑  Shift +

keyboard shortcut for?

Apple iBooks - (Click the border) Add a border to (or remove it from) the selection  

Apple iBooks - (Click the border segment) Add a border segment to (or remove it from) the selection  

Roll20 - While holding down Shift, hold down your Left Mouse Button upon a point on the tabletop. This will center everyone's field of vision about that point. This is known as "shift-pinging"  

Adobe Illustrator - (click on disabled mask thumbnail) Re-enable opacity mask  

Adobe After Effects 2021 - (click property or group shortcut) Add or remove property or group from set that is shown  

Adobe After Effects 2021 - To mouse-click point, select text from insertion point  

Substance Painter - Draw straight lines  

Substance Painter - Disable/Enable mask  

Zbrush 2023.1 - (on paintbrush icon) Toggle Polypaint Colorize for all SubTools  

Zbrush 2023.1 - On Layer thumbnail, toggle all layers on/off  

Zbrush 2023.1 - (click on the Timeline at the point where you want the copy) Copy selected key frame  

Zbrush 2023.1 - (click on all the key frames dots to be copied, then Shift + click the Timeline at the point where you want the copies) Copy multiple key frames  

Zbrush 2023.1 - (click on the Timeline cursor) Play the Timeline (will play as a loop)  

Blender 3.4.1 - Handle area action zones  

Blender 3.4.1 - Select (toggle)  

Blender 3.4.1 - Select (toggle)  

Blender 3.4.1 - Select (toggle)  

Blender 3.4.1 - Box select  

Blender 3.4.1 - Circle select (extend)  

Blender 3.4.1 - Lasso select  

Blender 3.4.1 - Sculpt  

Blender 3.4.1 - Stroke curves sculpt  

Blender 3.4.1 - Brush edit  

Blender 3.4.1 - Select paint curve point  

Blender 3.4.1 - Select keyframes  

Blender 3.4.1 - Box select  

Blender 3.4.1 - Select keyframes  

Blender 3.4.1 - Box select  

Blender 3.4.1 - Select  

Blender 3.4.1 - Box select  

Blender 3.4.1 - Mouse click on NLA channels  

Blender 3.4.1 - Select (toggle)  

Blender 3.4.1 - Select  

Blender 3.4.1 - Box select  

Blender 3.4.1 - Open/Close  

Blender 3.4.1 - Select (toggle)  

Blender 3.4.1 - Select (toggle)  

Blender 3.4.1 - Box select  

Blender 3.4.1 - Select (toggle)  

Blender 3.4.1 - Select (toggle)  

Blender 3.4.1 - Select  

Blender 3.4.1 - Box select  

Blender 3.4.1 - Select report  

Blender 3.4.1 - Set selection  

Blender 3.4.1 - Select  

Blender 3.4.1 - Select  

Blender 3.4.1 - Select (extend)  

Blender 3.4.1 - Grease pencil draw  

Blender 3.4.1 - Select (extend)  

Blender 3.4.1 - Select (extend)  

Blender 3.4.1 - Select (toggle)  

Blender 3.4.1 - Select time marker  

Blender 3.4.1 - Mouse click on channels  

Blender 3.4.1 - Box select  

Blender 3.4.1 - Deselect  

Adobe Illustrator (Mac) - Add to a selection with Selection tool, Direct Selection tool, Group Selection tool, Live Paint Selection tool, or Magic Wand tool  

Adobe Illustrator (Mac) - Subtract a selection with Selection tool, Direct Selection tool, Group Selection tool, or Live Paint Selection tool  

Adobe Illustrator (Mac) - (click Live Paint Bucket tool) Select opposite Live Paint Bucket tool options (if Paint Fills and Paint Strokes are currently selected, switch to Paint Fills only)  

Adobe Illustrator (Mac) - (click Live Paint Selection tool) Add to/subtract from a selection  

Adobe Illustrator (Mac) - (click Eyedropper tool) Sample color from an image or intermediate color from gradient  

Adobe Illustrator (Mac) - Select multiple width points  

Adobe Illustrator (Mac) - Extend existing selection  

Adobe Illustrator (Mac) - Select range of actions, brushes, layers, links, styles, or swatches  

Adobe Illustrator (Mac) - (click color bar) Change the color mode  

Adobe Illustrator (Mac) - (click on mask thumbnail) Disable opacity mask  

Adobe Illustrator (Mac) - (click on disabled mask thumbnail) Re-enable opacity mask  

Aseprite 1.2.27 (Windows) - Add selection  

Aseprite 1.2.27 (Windows) - Add Layers/Frames/Cels to selection  

Meshmixer - Deselect  

Meshmixer - Secondary  

Houdini - Add to seelection  

Houdini - Add to selection  

Adobe Photoshop CC - Select multiple pins  

Adobe Photoshop CC - (Click on points) Select multiple points on the curve  

Adobe Photoshop CC - (Direct selection tool) Select multiple anchor points  

Adobe Photoshop CC - (Any painting tool) Connects points with a straight line  

Adobe Photoshop CC - Select characters from insertion point to mouse click point  

Adobe Photoshop CC - Create a new text layer, when a text layer is selected in the Layers panel  

Adobe Photoshop CC - (Click the action/command) Select contiguous items of the same kind  

Adobe Photoshop CC - (Click on second frame) Select/deselect multiple contiguous frames  

Adobe Photoshop CC - (Click color channel) Select/deselect multiple color-channel selection  

Adobe Photoshop CC - (Click alpha channel) Select/deselect alpha channel and show/hide as a rubylith overlay  

Adobe Photoshop CC - (Click color bar) Cycle through color choices  

Adobe Photoshop CC - (Click vector mask thumbnail) Disable/enable vector mask  

Adobe Photoshop CC - (Click layer mask thumbnail) Toggle layer mask on/off  

Adobe Photoshop CC - (Click layer mask thumbnail) Toggle filter mask on/off  

Adobe Photoshop CC - Select/deselect multiple contiguous layers  

Adobe Photoshop CC - Select/deselect multiple contiguous layer comps  

Adobe Photoshop CC - (With Fill tool selected) Fill foreground area and preview extraction  

Cura 4 - Select multiple objects in the 3D viewer  

Tinkercad - Select multiple objects  

Corel Painter - (click on Open/Close triangle) Expand/Collapse all panels  

Corel Painter - Add color to selection  

Corel Painter - (click corner handles) Resize/Preserve aspect  

Corel Painter - Constrain to square  

Corel Painter - Constrain to circle  

Corel Painter - (click tile) Delete tile  

Adobe Photoshop (macOS) - Select multiple pins  

Adobe Photoshop (macOS) - Select multiple pins  

Adobe Photoshop (macOS) - (Click on points) Select multiple points on the curve  

Adobe Photoshop (macOS) - (Direct selection tool) Select multiple anchor points  

Adobe Photoshop (macOS) - (Any painting tool) Connects points with a straight line  

Adobe Photoshop (macOS) - Select characters from insertion point to mouse click point  

Adobe Photoshop (macOS) - Create a new text layer, when a text layer is selected in the Layers panel  

Adobe Photoshop (macOS) - (Click the action/command) Select contiguous items of the same kind  

Adobe Photoshop (macOS) - (Click on second frame) Select/deselect multiple contiguous frames  

Adobe Photoshop (macOS) - (Click color channel) Select/deselect multiple color-channel selection  

Adobe Photoshop (macOS) - (Click alpha channel) Select/deselect alpha channel and show/hide as a rubylith overlay  

Adobe Photoshop (macOS) - (Click color bar) Cycle through color choices  

Adobe Photoshop (macOS) - (Click vector mask thumbnail) Disable/enable vector mask  

Adobe Photoshop (macOS) - (Click layer mask thumbnail) Toggle layer mask on/off  

Adobe Photoshop (macOS) - (Click layer mask thumbnail) Toggle filter mask on/off  

Adobe Photoshop (macOS) - Select/deselect multiple contiguous layers  

Adobe Photoshop (macOS) - Select/deselect multiple contiguous layer comps  

Adobe Photoshop (macOS) - (With Fill tool selected) Fill foreground area and preview extraction  

Marmoset Toolbag 4 - Timeline scale tool: To activate, hold Shift and left mouse button click to set the start point, and click again (while holding shift to set the endpoint). This will bring up the timeline scale interface  

Inkscape - Set stroke color on selection  

Inkscape - toggle selection  

Inkscape - reset rotation center  

Inkscape - toggle selection  

Inkscape - toggle selection  

Inkscape - toggle selection  

Inkscape - toggle selection  

Inkscape - toggle selection  

Inkscape - remove rounding  

Inkscape - toggle selection  

Inkscape - zero inner radius (inner handle)  

Inkscape - zoom out  

Inkscape - add to selected path  

Inkscape - toggle selection  

Inkscape - pick stroke color  

Nuke - (use create node) Create node in new branch  

Nuke - Add or Remove points from selection  

Nuke - (Bezier tool) Create a sharp point on previous point  

Nuke - (editing points) Bring up transform box for selected points  

MyPaint - Draw line  

ProgeCAD - Deselect entities  

Adobe Lightroom Classic - (click a panel) Open a new panel without closing soloed panel  

Adobe Lightroom Classic - Select multiple folders or collections (in Library, Slideshow, Print, and Web modules)  

Adobe Lightroom Classic - Select multiple contiguous photos  

Adobe Lightroom Classic - (click filter labels) Open multiple filters in the Filter bar  

Adobe Lightroom Classic (Mac) - (click a panel) Open a new panel without closing soloed panel  

Adobe Lightroom Classic (Mac) - Select multiple folders or collections (in Library, Slideshow, Print, and Web modules)  

Adobe Lightroom Classic (Mac) - Select multiple contiguous photos  

Adobe Lightroom Classic (Mac) - (click filter labels) Open multiple filters in the Filter bar  

Pinnacle Studio 22 - (on trim) Open similar trim point on all tracks  

Enterprise Architect 14 - (click on the first and last object in the range) Select a range of objects for an operation.  

Global Mapper 21 - REMOVE selected features from cached selection  

Global Mapper 21 - New vertex will be inserted at NEAREST LOCATION to clicked location on selected feature rather than at click location  

Global Mapper 21 - (click on Reference Image) ROUND the clicked location to nearest 30 seconds for arc degree units or nearest 1000 ground units for linear measurements (like meters and feet)  

Global Mapper 21 - (Zoomed View) Automatically ADD CLICKED POINT to GCP list (simulate press of 'Add GCP to List' button)  

Altair HyperView - Window select  

PyVista 0.42 - Pan the rendering scene  

Pixelmator Pro - Paint or erase a straight line  

Pixelmator Pro - Paint straight lines  

Corel Painter (Mac) - Add color to selection  

Corel Painter (Mac) - (click corner handles) Resize/Preserve aspect  

Corel Painter (Mac) - Constrain to square  

Corel Painter (Mac) - Constrain to circle  

Corel Painter (Mac) - (click tile) Delete tile  

Adobe Dimension CC (Windows) - Add to Selection (Move, Rotate, Scale, and Magic Wand Tools)  

Adobe Dimension CC (Windows) - Subtract from Selection (Move, Rotate, and Scale)  

Adobe Dimension CC (Mac) - Add to Selection (Move, Rotate, Scale, and Magic Wand Tools)  

Adobe Dimension CC (Mac) - Subtract from Selection (Move, Rotate, and Scale)  

Affinity Photo - Select multiple  

Affinity Photo - Paint a brush stroke along a straight line  

Adobe Photoshop Elements (Mac) - Select characters from insertion point to mouse click point  

Adobe Photoshop Elements (Mac) - (on any painting tool) Connect points with a straight line (draw a straight line)  

Sketch - Add layer to selection/deselect layer in Canvas  

Sketch - Select Multiple Points  

Substance Painter (Mac) - Draw straight lines  

Substance Painter (Mac) - Disable/Enable mask  

LDView - Change light direction  

LDCad - (on part) Set part as the current working part without changing any of the other work variables  

Easel - (click unselected object) Add an object to selection  

Easel - (click selected object) Remove an object from selection  

Simplify3D - (click models) Select multiple models  

FastStone MaxView 3.3 - Zoom in  

Modo 12.1 - arrow   Expand/close all (also in Shader Tree)  

UVLayout 2.11 - Click to pick/unpick single shell  

UVLayout 2.11 - Click in empty space to unpick all shells  

InVision Studio 1.28.2 - Add or Remove Siblings and Parents To or From Selection  

InVision (macOS) - Add or Remove Siblings and Parents To or From Selection  

vecta.io - (click handles) Aspect ratio resizing  

Creo Elements / Direct Modeling 20.1 - Select list start/resume  

IdeaMaker - Select multiple models  

Aseprite 1.2.27 (macOS) - Add selection  

Aseprite 1.2.27 (macOS) - Add Layers/Frames/Cels to selection  

Pencil2D 0.6.6 - Select a range of frames  

Luminar 3 - Select multiple contiguous photos  

Acorn 7 - Paint straight lines  

Spline (Windows) - Select/Deselect Range of Objects w/ Children  

Spline (Windows) - Select/Deselect Objects w/ Children 1 by 1  

Spline (Mac) - Select/Deselect Range of Objects w/ Children  

Spline (Mac) - Select/Deselect Objects w/ Children 1 by 1  

PICO-8 (Windows) - (on the notes. First click is left side, second click is right side) Select Multiple Notes  

PICO-8 (Windows) - (on an effect) Apply Effect to All Notes  

BFME 2 - Queue 5 Units From a Building  

Command & Conquer: Generals - Add a unit to selection  

Bloons TD Battles - Place multiple towers  

Bloxburg build mode (PC) - Paint multiple items  

Call to Arms - Gates of Hell: Ostfront - Add unit to selected squad  

Call to Arms - Gates of Hell: Ostfront - Delete unit from squad  

Crusader Kings III - Add or remove a unit from selection  

Mad Island - Transfer items while the chest is open  

Kerbal Space Program - Move the entire ship  

Jagged Alliance 2 (version 1.13) - Plant tripwire using the previous network settings  

Jagged Alliance 2 (version 1.13) - Auto-attach/merge with item-in-cursor to applicable item (works in Strategic Map and Sector Inventory as well)  

Jagged Alliance 2 (version 1.13) - Assign / remove all in Militia Assignment window  

Dark Souls III (PC) - Strong attack (right hand)  

Forts - Group weapons  

Dyson Sphere Program (PC) - Copy Selected Build  

Astroneer - Automatically place items into inventory if there is an available space  

Command & Conquer Remastered Collection - Add units to selection  

Command & Conquer Remastered Collection - (click sidebar) Queue / Cancel 5 units  

Stellaris (PC) - Add/remove fleet to/from selection  

Lichess - Draw circles and arrows on the board  

They Are Billions (PC) - Select all units of that type on the screen  

RimWorld - Select multiple items  

Stardew Valley (PC) - (on an inventory item / stack) Move it to the top row  

Stardew Valley (PC) - Continuously purchase items inside a shop / merchant's inventory window  

Stardew Valley (PC) - (on the Catalogue or Furniture Catalogue) to add it directly to inventory, insead of attaching it to mouse cursor  

StarCraft - (on own unit) Add or remove unit from current selection  

StarCraft - (on unit in selection box) Remove unit from current selection  

Total War: Attila - Draw path for units  

Warcraft III: Reforged - (click on a unit) Add or remove a unit from the current selection  

Age of Empires IV - (on a unit) Add/Remove unit from selection  

Age of Empires IV - (on ground) Queue building or ability placement  

Might and Magic VII: For Blood and Honor - (on a valid target) Cast readied spell  

Assassin's Creed Mirage (PC) - Heavy attack  

Warcraft III - Add/Remove unit from current selection  

OpenTTD 12.1 - Instead of building, a cost estimate window pops up.  

Mr. Mine - Open chests without popup  

Mr. Mine - Open a Cave directly from "K" building  

Mr. Mine - Forge 5 Gems at once  

Mr. Mine - Quickly add and put away parts in the reactor components  

Tibia - (Classic Control off/on) 'Look' at any item, object, monster, NPC or character  

Spore - (hold and move) Move all vehicle blocks (In Parts Mode of Vehicle Editor Only)  

Spore - (hold on a rigblock) Move selected rigblock horizontally (In Parts Mode of Building Editor Only)  

Spore - Paint all regions (In Paint Mode)  

Spore - Assigns the selected texture from the palette to the entire block you are clicking on, instead of one region at a time. Useful for quickly painting a multi block model. (In Paint Mode of Building and Vehicle Editor Only)  

Stormworks: Build and Rescue - Expand selection to include pointed component (if selection tool is active)  

Don't Starve (PC) - Move stack of things to another container  

Path of Exile - Hold while clicking left mouse button to attack without moving around  

Clicker Heroes - (while placing Auto Clicker on the monster) Put all remaining Auto Clickers  

GemCraft - Chasing Shadows - Adjust target priority  

Fantasy Grounds - Select from cursor  

Fantasy Grounds - Select text from cursor to click point  

Fantasy Grounds - (GM formatted text only, click on link graphic) - Set link as shareable  

Fantasy Grounds - (Draw / Mask) Straight line (vs. freehand)  

Fantasy Grounds - (on link pin graphic) Make link shareable  

Sun Haven (PC) - Move item(s) from one inventory to another  

Crusader Kings II - Add or remove a unit to the selection  

Tails of Iron (PC) - Parry  

Craft the World - Mine/chop multiple blocks at the same time  

AI War Classic - select unit (adds to prior selected)  

AI War Classic - (build button) queue 5 ships instead of 1  

AI War Classic - (ship placement mode) set position and stay in mode  

Total War: Attila (Mac) - Draw path for units  

Stoneshard (PC) - Use / equip item  

Ragnarok Online - (click on a character) Follow a character that was clicked on (left or right click on character using mouse)  

Ragnarok Online - (click direction) Change the direction the character is facing to direction clicked.  

Quest for Glory I - "Look" at an object  

Dinkum (PC) - Move stacks in inventory  

Rise of Industry - Place more than one of the building  

Dominions 5 - Select range  

Dominions 5 - Select a range of units  

Foundry Virtual Tabletop 11 - Add or remove selected objects  

Space Station 14 - Examine  

LightBurn - Add to current selection  

LightBurn - Select all items on layer  

Microsoft Excel 2019 - To open a template as a template file and edit it (instead of saving it as .xlsx), right click the file and Shift (plus) click to "Open" menu item  

Snipaste 2.3.5 - (click on the Save icon) Quick save  

FL Studio 21 - (on clip/pattern) Clone (drag while holding clip/pattern)  

FL Studio 21 - Clone (drag while holding clip/pattern), release Shift after dragging to unlock vertical movement  

FL Studio 21 - Start sample playback from mouse cursor position in Browser sample preview  

FL Studio 21 - Select multiple items in Browser  

Cmder 1.3.16 - Select and copy text from buffer  

Diagrams.net - (on a library shape) Replace the selected item with the clicked item  

Avid Pro Tools 2021.6 - Select contiguous items in a browser or column headers  

Ableton Live 10 - Move Start Marker to Position  

Ableton Live 10 - Click to Append Devices to a Selected Device  

Dynamics 365 Business Central - Extend the selection of rows to include the row that you click and all the rows in between  

Diagrams.net (mouse focused) - Select/Deselect shapes  

Diagrams.net (mouse focused) - Hold Shift and click on or drag a shape from the shape libraries. The new shape will have a white fill and a black outline, as per the original diagrams.net default style for shapes and not a custom default style that you have set  

Diagrams.net (mouse focused) - Select a shape on the drawing canvas, hold Shift and click on a shape in the shape library to replace the selected shape. This is faster than dragging a new shape from the shape library over an existing shape to replace it  

QuickBooks Desktop (Mac) - (click the close box) Close all windows in QuickBooks  

Vegas Pro 18 - (click events) Range select  

Scribus - Add object to selection set  

Viz Artist 4.4 - (Click on Snap) Create Snapshot in RGBA  

Viz Artist 4.4 - (click handle and drag) Mirror Handles  

Viz Artist 4.4 - Sharpen Edge of Selected Point or Points  

Viz Artist 4.4 - Move single handle  

Soundtrap (Windows) - Toggle selection  

Soundtrap (Windows) - Toggle selection  

Basecamp - Scroll to a section within a project  

MindMeister - Select a range of topics with the same parent  

Apple Pages - Select or deselect additional objects  

Apple Pages - Select additional cells  

Apple Pages - (click in the destination cell) Extend the selection from the selected cell to the destination cell  

LibreOffice Impress - Select adjacent items or a text passage. Click at the start of a selection, move to the end of the selection, and then hold down Shift while you click  

Ableton Live 10 (Mac) - Move Start Marker to Position  

TickTick - Select range  

Cakewalk by Bandlab - (click control) Select a specific control  

Cakewalk by Bandlab - Sets panner point to the point that you click (large and medium panners only)  

Noteflight (2022) - Add region on left/right to selection  

Pcon Planner 8 - Wall Dimension for length of complete wall only  

Todoist (Web) - (Click the checkbox) Complete and archive recurring task  

Todoist (Web) - Select multiple tasks  

Todoist (Web) - (Click the checkbox) Complete and archive recurring task  

Todoist (Web) - Select multiple tasks  

Asana - Select Range  

Asana (Mac) - Select Range  

Todoist - Select and change multiple tasks at once  

Todoist - (hold down Shift while completing the sub-task or recurring task) Complete a sub-task or recurring task and archive it  

CintaNotes 3.13 - Move cursor extending selection.  

CintaNotes 3.13 - Add an alternative to currently selected tags (tag OR operation).  

Ynab - Select a group of transactions  

iPadOS 13 - (tap link) Add link to reading list *  

Cryptee (macOS) - (on files / photos) Multiple selection  

Cryptee (Windows, Linux) - (on files / photos) Multiple selection  

Favro - (hold) Select multiple cards  

Autodesk Flame 2019 - Select Channel  

Autodesk Flame 2019 - Add Channel to Selection  

Dynamics NAV (Windows client) - On multiple column headers, the columns will all be sorted in the same ascending or descending direction.  

FeatureCAM 2023 - (click an edge when filleting) Selects all edges of the face and adds them to the list  

FeatureCAM 2023 - (click the NC Code tab) Show ACL instead of NC code  

FeatureCAM 2023 - (click while clipping when Multiple Region is On) Removes the entire picked region instead of to the nearest intersection.  

FeatureCAM 2023 - (click the Show button in the SCL dialog) Displays a dialog that shows the attributes of the model selected in SCL dialog.  

Adobe Experience Manager 6.4 (Windows) - Select multiple components  

Adobe Experience Manager 6.4 (macOS) - Select multiple components  

FlowMapp - Select multiple Page Cards  

FlowMapp - Multiselect elements  

Configura Cet Designer - (move mouse up/down respectively) Zoom in/out  

Todoist (Windows) - (click the checkbox) Complete and archive recurring task  

Todoist (Windows) - Select multiple tasks  

NetDocuments - Select a range of items  

HX Edit (Windows) - Contiguous multi-select  

Uxpin - Select all between  

Uxpin - Select multiple  

Heptabase (macOS) - Select multiple blocks  

LabView - Selects multiple objects; adds object to current selection  

LabView - Undoes last point where you set a wire  

ArcGIS Pro 3.2 - Select multiple layers in the Contents pane  

ArcGIS Pro 3.2 - (click vertices) Select multiple vertices  

ArcGIS Pro 3.2 - (click segments) Select all vertices between the clicked segments  

ArcGIS Pro 3.2 - Select inclusive rows  

ArcGIS Pro 3.2 - Center and zoom in to the pointer location  

ArcGIS Pro 3.2 - (click upper left cell) Select all records  

ArcGIS Pro 3.2 - Select all fields between the first and second click  

JMP 15 (macOS) - To select multiple bars in a Distribution graph, hold down the Shift or Cmd key and click the bars  

Onshape 1.98 - Open in new window  

Oracle Analytics Desktop - (click the artifact) Open an artifact in a new browser window  

Hudl Sportscode - Select consecutive rows